Rockwell Automation Allen-Bradley 2094-BC01-M01-S, User Manual

Page: 95 / 280

Rockwell Automation Publication 2094-UM001D-EN-P - May 2010 95
Connecting the Kinetix 6000 Drive System Chapter 5
Wire the Input Power (IPD) Connector
This example applies to any IAM module or common-bus leader IAM module.
Figure 47 - IAM Module (IPD connector)
Table 52 - Input Power (IPD) Connections
Table 53 - Termination Specifications
ATTENTION: Make sure the input power connections are correct when
wiring the IPD connector plug and that the plug is fully engaged in the
module connector. Incorrect wiring/polarity or loose wiring can cause
explosion or damage to equipment.
DC-
DC+
L3
L2
L1
1 2 3 4 5 6
Kinetix 6000
IAM Module, Top View
OPL Connector (LIM module ) or Other Three-phase Input
IPD Connector
(IAM or leader IAM module)
2094-AL09
LIM Module
2094-AL xx S, 2094-BL xx S, or
2094-XL75S-C x LIM Modules
OPL Pin Signal OPL Pin Signal IPD Pin Signal
1 L1’ 4 L1’ 6 L1
2 L2’ 3 L2’ 5 L2
3 L3’ 2 L3’ 4 L3
4 1 3
N/A
2 DC+
1 DC-
IAM Module Cat. No. Input VAC
Recommended
Wire Size
mm
2
(AWG)
Strip Length
mm (in.) Torque Value
N•m (lb•in)
2094-AC05-M xx - x
2094-AC09-M02- x
230V AC
2.5 (14) 10 (0.38)
0.5…0.6
(4.4…5.3)
2094-AC16-M03- x 10 (8)
16 (0.63)
2.4…3.0
(21.6…26.5)
2094-AC32-M05- x 25 (4)
2094-BC01-M xx - x
2094-BC02-M02- x
460V AC
4.0 (12) 10 (0.38)
1.2…1.5
(10.6…13.2)
2094-BC04-M03- x 10 (8)
16 (0.63)
2.4…3.0
(21.6…26.5)
2094-BC07-M05- x 25 (4)