Rockwell Automation Allen-Bradley 2094-BC01-M01-S, User Manual

Page: 50 / 280

50 Rockwell Automation Publication 2094-UM001D-EN-P - May 2010
Chapter 3 Mounting the Kinetix 6000 Drive System
4.
Hang the mounting bracket from the slot on the power rail.
5. Pivot module downward and align the guide pins on the power rail with
the guide pin holes in the back of the module.
Slots for additional axis modules,
shunt module, or slot-filler modules.
Power Rail Slot
Mounting Bracket
Power Rail
Kinetix 6000 IAM, AM, Shunt,
or Slot-filler Module
(IAM module is shown)
Guide Pin
Holes
Power rail (side view)
in upright vertical position.
Guide Pins
Pivot module downward
and align with guide pins.
Kinetix 6000 IAM, AM, Shunt, or
Slot-filler Module, Side View
(IAM module is shown)
Kinetix 6000 IAM, AM, Shunt, or
Slot-filler Module, Rear View
(IAM module is shown)
TIP
The IAM module can have two or three power rail connectors and guide
pins, the AM module can have one or two, all other modules have one.