Ricoh Ri 100 Operating Instructions Manual Download Page 136

Page: 136 / 260

Press the [ ] or [ /Menu] key to display [Clean Maint Unit], and then press the [#Enter]
key.

<Maintenance>
Clean Maint Unit

Press the [#Enter] key.

Press # to
clean Maint Unit

When "Open Top Cover to clean unit" is displayed, open the top cover.

The Maintenance Unit will move to a position where you can clean it.

Wipe off any dirt in the area shown in the figure with the cleaning stick moistened with
the cleaning liquid.

For the top part of the cap (shown in red in the figure), wipe it gently.

DSA198

1. Wiper (back and front)

2. Lever

3. Cap (side part, top part, and inner part)

DSA200

5. Machine Setup Menus

134

Summary of Contents for Ri 100





































































































































































































































































Search results

Summary of Contents for Ri 100

Reviews:

Related manuals for Ri 100

Brands by name

Popular brands

Ricoh Ri 100, Operating Instructions Manual

Search results

Summary of Contents for Ri 100

Reviews:

Related manuals for Ri 100

Brands by name

Popular brands