manualshive.com logo in svg

Ricoh Ri 100, Operating Instructions Manual

The Ricoh Ri 100 is a cutting-edge printing solution that allows you to bring your creativity to life. With its user-friendly interface and high-quality results, this compact printer is perfect for personal or small business use. Enhance your printing experience by easily accessing the Operating Instructions Manual from our website, where you can download it for free.

Share
Download
background image

Installing the Ink Cartridges

• Keep ink and ink containers out of reach of children.

• If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if

necessary.

• If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor

immediately.

• When replacing ink, avoid getting ink on your clothing. If ink comes into contact with your

clothing, wash the stained area with cold water. Hot water will set the ink into the fabric and
make removing the stain impossible.

• When replacing ink, avoid getting ink on your skin. If ink comes into contact with your skin,

wash the affected area thoroughly with soap and water.

• When removing the ink cartridge, avoid putting your hand near the place where the ink

cartridge is installed. If ink comes in contact with your hands, wash them thoroughly with soap
and water.

• Some ink is consumed to fill the print heads when you turn on the machine for the first time.

Therefore, the number of pages to be printed will be smaller than when normal cartridges are used.

• When installing the ink cartridge, do not touch the inside of the machine.
• Do not turn the machine on until you have read how to do so.

DSB259

• Be sure to install the unused ink cartridge that is genuine. Installing any other cartridge could result

in incomplete ink filling and malfunction.

Installing the Ink Cartridges

35

Summary of Contents for Ri 100





































































































































































































































































Reviews:

No comments

Related manuals for Ri 100

Unimark Sprite Installation And Operator'S Manual preview
Sprite
Brand: Unimark Pages: 36
Nehoc TCA3-SP User Manual – Operating Manual preview
TCA3-SP
Brand: Nehoc Pages: 9
Kashino Technology CSN-A1K User Manual preview
CSN-A1K
Brand: Kashino Technology Pages: 72
Kyocera EP 510DN Installation Manual preview
EP 510DN
Brand: Kyocera Pages: 2
Oce cm5520 User Manual preview
cm5520
Brand: Oce Pages: 366
Xerox 7400DN - Phaser Color LED Printer Accessory Manual preview
7400DN - Phaser Color LED Printer
Brand: Xerox Pages: 3
Unisys UDS2265+ Operator'S Manual preview
UDS2265+
Brand: Unisys Pages: 144
Oki Executive Series 3037 User Manual preview
Executive Series 3037
Brand: Oki Pages: 546
Tachosys digiprint Instruction Manual preview
digiprint
Brand: Tachosys Pages: 5
Canon Pixma TS201 Online Manual preview
Pixma TS201
Brand: Canon Pages: 189
Canon PIXMA TS3160 Online Manual preview
PIXMA TS3160
Brand: Canon Pages: 293
Canon PIXMA TS302 Online Manual preview
PIXMA TS302
Brand: Canon Pages: 341
Canon PIXMA TS3520 Online Manual preview
PIXMA TS3520
Brand: Canon Pages: 387
Canon PIXMA TS3355 Online Manual preview
PIXMA TS3355
Brand: Canon Pages: 396
Canon PIXMA TS5353 Online Manual preview
PIXMA TS5353
Brand: Canon Pages: 465
Canon Pixma TR7800 Series Online Manual preview
Pixma TR7800 Series
Brand: Canon Pages: 554
Canon Pixma TS7520 Online Manual preview
Pixma TS7520
Brand: Canon Pages: 460
Canon PIXMA TR8560 Online Manual preview
PIXMA TR8560
Brand: Canon Pages: 498

Brands by name

Popular brands

Load more brands