![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266161.webp)
Chapter 5: Management with the CLU
149
Setting SCSI Termination
To set Termination for the VTrak SCSI controller “Out” connectors:
1.
From the Main Menu, highlight
SCSI Management
and press Enter.
2.
Highlight one of the SCSI ports to select it and press Enter.
3.
Highlight
Channel Settings
and press Enter.
4.
Highlight
Termination Control
.
5.
Press the spacebar to toggle through
Automatic
,
On
and
Off
.
6.
Type Ctrl-A save your settings.
Viewing SCSI Target Information
1.
From the Main Menu, highlight
SCSI Management
and press Enter.
2.
Highlight one of the SCSI ports to select it and press Enter.
3.
Highlight
Target Info
and press Enter.
This screen displays a list of the 16 SCSI Targets for the selected SCSI channel.
To see information and statistics on an enabled SCSI Target, highlight the Target
Cautions
•
Turn off termination only when the VTrak is NOT the last
device in the SCSI chain.
•
Internal termination only works on the “Out” SCSI connectors.
Summary of Contents for VTRAK M610p
