VTrak M610p Product Manual
22
Setting up VTrak with the CLU
1.
At the administrator@cli> prompt, type
menu
and press Enter.
The CLU main menu appears.
Figure 1. CLU main menu
2.
With
Quick Setup
highlighted, press Enter.
The first Quick Setup screen enables you to make Date and Time settings.
Setting system date and time
1.
Press the arrow keys to highlight
System Date
.
2.
Press the backspace key to erase the current date.
3.
Type the new date.
4.
Follow the same procedure to set the System Time.
5.
Press Ctrl-A to save these settings and move to the Management Port
configuration screen.
Making Management Port settings
By default, DHCP is disabled on VTrak and the default Management Port IP
address is set to 10.0.0.1.
Use a new Management Port IP address to log into the VTrak over your network.
Manual IP settings
To make Management Port settings manually:
1.
Press the arrow keys to highlight
IP Address
.
2.
Press the backspace key to erase the current IP Address.
3.
Type the new IP Address.
Summary of Contents for VTRAK M610p
