![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266177.webp)
Chapter 5: Management with the CLU
165
Making CIM Settings
By default, CIM (Common Information Model [a protocol]) service is set to
Automatic and its normal status is Started.
To make CIM service settings:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Software Management
and press Enter.
3.
Highlight
CIM
and press Enter.
4.
Highlight
Startup Type
and press the spacebar to toggle between
Automatic
and
Manual
.
5.
Highlight
HTTP
and press the spacebar to toggle between
Enabled
and
Disabled
.
6.
Highlight
HTTP Port
, press the backspace key to erase, type new value.
5988 is the default port number.
7.
Highlight
HTTPS
and press the spacebar to toggle between
Enabled
and
Disabled
.
8.
Highlight
HTTPS Port
, press the backspace key to erase, type new value.
5989 is the default port number.
9.
Highlight
Authentication
and press the spacebar to toggle between
Enabled
and
Disabled
.
Note: There is only one user. The default name is
cim
. No changes are
possible.
Note: CIM service must be running to change the password.
The default password is
password
.
10. Highlight
Change Password...
and press Enter to change the password.
11. Highlight
Old Password
and type the current password.
12. Highlight
New Password
and type a new password.
13. Highlight
Retype Password
and type the new password again.
14. Press Ctrl-A to save your settings.
To start, stop or restart the CIM service, highlight
Start
,
Stop
, or
Restart
and
press Enter.
Making Netsend Settings
By default, Netsend service is set to Manual and its normal status is Stopped.
To make Netsend service settings:
Summary of Contents for VTRAK M610p
