![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266131.webp)
Chapter 5: Management with the CLU
119
Figure 4. The CLU main menu
Quick Setup
– A sequence of four steps to setup System Date & Time,
Management Port, and RAID Configuration.
Subsystem Management
– View controller information, lock/unlock the
controller, set date and time, and monitor the enclosure.
Physical Drive Management
– View disk drive assignments and parameters,
change disk drive cache settings and command queuing, and locate a physical
drive.
Disk Array Management
– View disk array information, create and delete disk
arrays, transport, rebuild, PDM, and transition functions, and locate a disk array,
create and delete logical drives.
Logical Drive Management
– View logical drive information, name logical
drives, initialization and redundancy check, and locate a logical drive.
Network Management
– Set the IP address for Management Port, gateway, and
DNS server; subnet mask.
SCSI Management
– Channel information, Enable/disable targets, Termination
settings, Target information and statistics.
Background Activity
– Settings for Media Patrol, Auto Rebuild, Rebuild,
Migration, PDM, Transition, Synchronization, Initialization, Redundancy Check
rate, and thresholds.
Event Viewer
– View the event logs.
Summary of Contents for VTRAK M610p
