![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266022.webp)
VTrak M610p Product Manual
10
Installing Disk Drives
You can populate the VTrak with 3.5-inch, 1.5 Gb or 3.0 Gb SATA drives. For
optimal performance, install physical drives of the same model and capacity. The
drives’ matched performance allows the logical drive to function better as a single
drive. The table below shows the number of drives required for each RAID level.
Drive Slot Numbering
You can install any suitable disk drive into any slot in the enclosure. The diagram
below shows how VTrak’s drive slots are numbered. Slot numbering is reflected
in the WebPAM PROe and CLU user interfaces.
Figure 3. VTrak M610p drive slot numbering
Level
Number of Drives
Level
Number of Drives
RAID 0
1 or more
RAID 6
4 to 16
RAID 1
2 only
RAID 10
4 or more*
RAID 1E
2 or more
RAID 50
6 or more
RAID 5
3 to 16
* Must be an even number of drives.
Note
Unlike other VTrak models, the M610p does not support Parallel
ATA disk drives. There is no PATA-to-SATA adapter available for
these models.
8
6
5
1
2
3
4
7
13
14
15
16
9
10
11
12
Summary of Contents for VTRAK M610p
