![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266035.webp)
Chapter 3: Setup
23
4.
Follow the same procedure to specify the Subnet Mask, Gateway IP
Address and DNS Server IP Address.
If you do not have a DNS server, skip the DNS Server IP address.
5.
Press Ctrl-A to save your settings.
Automatic IP settings
To make Management Port settings automatically:
1.
Press the arrow keys to highlight
DHCP
.
2.
Press the spacebar to toggle to
Enable.
3.
Press Ctrl-A to save these settings.
Viewing IP address and settings
To view the current IP address and network settings when using DHCP:
1.
Press the arrow keys to highlight
DHCP
.
2.
Press the spacebar to toggle to
Disable
.
The current Management Port settings are displayed.
3.
Press the spacebar to toggle DHCP back to
Enable
.
4.
Press Ctrl-A to save these settings and move to the RAID configuration
screen.
Exiting the CLU
1.
Highlight
Skip the Step and Finish
and press Enter.
2.
Highlight
Return to CLI
and press Enter.
This completes the Management Port setup. Go to “Creating Disk Arrays with
WebPAM PROe” on page 24.
Summary of Contents for VTRAK M610p
