![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266247.webp)
Chapter 8: Troubleshooting
235
Migration has detected/
cleared stale NV
Watermark
Watermarks are progress markers left as the result of
interrupted RAID migrations. If the watermark was
cleared, migration should finish.
Array was incomplete due
to missing NV Watermark
RAID migration was interrupted by a shutdown. If
array is online, try migration again. See page 100. If
array is offline, delete and recreate array. See
page 96 and page 94.
Rebuild
Rebuild is started
Result of settings or user action. Normal.
Rebuild is completed
Normal.
Rebuild is paused
Rebuild paused because of user intervention,
schedule or a higher priority background activity.
Rebuild is resumed
Rebuild has resumed again after a pause.
Rebuild is stopped
Rebuild stopped because of user intervention,
schedule or the logical drive was deleted or the target
disk drive encountered an error. If rebuild stopped by
user intervention, restart the rebuild. See page 101.
Rebuild stopped internally The logical drive is offline. See page 239.
Rebuild is aborted due to
an internal error.
System resources are low. Reduce system load or
restart the VTrak. See page 177.
Rebuild is queued
Rebuild has been set manually or by schedule.
Rebuild marks logical
drive synchronized upon
rebuild completion
Result of successful rebuild. Normal.
Redundancy Check
Redundancy Check is
started
Redundancy Check has started manually or by
schedule.
Redundancy Check is
completed
Redundancy Check has finished.
Redundancy Check is
paused
Redundancy Check paused because of user
intervention, schedule or a higher priority background
activity.
Redundancy Check is
resumed
Redundancy Check has resumed again after a
pause.
Reported Event
Corrective Action
Summary of Contents for VTRAK M610p
