![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266176.webp)
VTrak M610p Product Manual
164
6.
Press Ctrl-A to save your settings.
To start, stop or restart the SNMP service, highlight
Start
,
Stop
, or
Restart
and
press Enter.
Managing SNMP Trap Sinks
Creating a SNMP trap sink
To create a trap sink:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Software Management
and press Enter.
3.
Highlight
SNMP
and press Enter.
4.
Highlight
Trap Sinks
and press Enter.
A list of the current trap sinks appears.
Adding a trap sink
To add a trap sink:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Software Management
and press Enter.
3.
Highlight
Create New Trap Sink
and press Enter
4.
Highlight
Trap Sink IP address
and press the backspace key to erase the
current value, then type the new IP address in this field.
5.
Highlight
Trap Filter
and press the spacebar to toggle through the severity
levels.
The Severity Levels are (lowest to highest) Information, Warning, Minor,
Major, Critical and Fatal.
6.
Press Ctrl-A to save the Trap Sink.
Deleting a trap sink
To delete a trap sink:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Software Management
and press Enter.
3.
Highlight the trap sink you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
4.
Highlight
Delete Marked Entries
and press Enter.
Summary of Contents for VTRAK M610p
