Promise Technology VTRAK M610p Product Manual Download

Page: 152 / 284

VTrak M610p Product Manual

140

Highlight

Transport

and press Enter.

Press Y to confirm.

Rebuilding a Disk Array

Before you can rebuild, you must have a replacement physical drive of adequate
capacity or your disk array. To rebuild a disk array:

From the Main Menu, highlight

Disk Array Management

and press Enter.

Highlight the disk array you want and press Enter.

Highlight

Background Activities

and press Enter.

Highlight

Rebuild

and press Enter.

Specify the source and target physical drives.

Highlight

Start

and press Enter.

Migrating a Disk Array

In order to migrate RAID level, you may have to add physical drives. For more
information, see “RAID Level Migration” on page 205.

To migrate a disk array:

From the Main Menu, highlight

Disk Array Management

and press Enter.

Highlight the disk array you want and press Enter.

Highlight

Background Activities

and press Enter.

Highlight

Migration

and press Enter.

Highlight the physical drive you want to add and press the spacebar to select
it.

Repeat this action to add more physical drives.

Highlight

Save Settings and Continue

and press Enter.

To change RAID level, Highlight the logical drive in the list and press Enter.

Highlight

RAID Level

and press the spacebar to toggle through the available

RAID levels.

Optional. If you want to increase capacity, highlight

Expand Capacity

and

press the spacebar to toggle to

Yes

Notes

•

You can add physical drives to a RAID 50 array but you
cannot change the number of axles.

•

If you add an odd number of physical drives to a RAID 10
array, it will become a RAID 1E array by default.

Summary of Contents for VTRAK M610p





























































































































































































































































































Search results

Summary of Contents for VTRAK M610p

Reviews:

Related manuals for VTRAK M610p

Brands by name

Popular brands

Promise Technology VTRAK M610p, Product Manual

Search results

Summary of Contents for VTRAK M610p

Reviews:

Related manuals for VTRAK M610p

Brands by name

Popular brands