![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266139.webp)
Chapter 5: Management with the CLU
127
2.
Highlight E
nclosure Management
and press Enter.
3.
Highlight
Power Supplies
and press Enter.
4.
Highlight
Locate Power Supply
and press Enter.
The LED on the selected power supply blinks for one minute.
Viewing Blower Status
To view the status of the blowers:
1.
From the Main Menu, highlight
Subsystem Management
and press Enter.
2.
Highlight E
nclosure Management
and press Enter.
3.
Highlight
Blowers
and press Enter.
The screen displays the status and speed of VTrak’s blowers. There is one
blower in each cooling unit. If blower speed is below the Healthy Threshold, there
is a blower malfunction. See “Replacing a Cooling Unit Fan” on page 181.
Viewing Voltage Sensor Status
To view the status of the voltage sensors:
1.
From the Main Menu, highlight
Subsystem Management
and press Enter.
2.
Highlight E
nclosure Management
and press Enter.
3.
Highlight
Voltage Sensors
and press Enter.
If any voltage is outside the Healthy Threshold values, there is a voltage
malfunction in the enclosure. See “Chapter 8: Troubleshooting” on page 213.
Viewing Temperature Sensor Status
To view the status of the temperature sensors:
1.
From the Main Menu, highlight
Subsystem Management
and press Enter.
2.
Highlight E
nclosure Management
and press Enter.
3.
Highlight
Temperature Sensors
and press Enter.
If any temperature exceeds the Healthy Threshold value, there is an overheat
condition in the enclosure. See “Setting Temperature Thresholds” on page 127
and “Chapter 8: Troubleshooting” on page 213.
Setting Temperature Thresholds
To change temperature thresholds:
1.
From the Main Menu, highlight
Subsystem Management
and press Enter.
2.
Highlight
Enclosure Management
and press Enter.
3.
Highlight
Enclosure Settings
and press Enter.
Summary of Contents for VTRAK M610p
