![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266158.webp)
VTrak M610p Product Manual
146
Running Redundancy Check
Redundancy Check is a maintenance procedure for logical drives in fault-tolerant
disk arrays that ensures all the data matches exactly. To run Redundancy Check:
1.
From the Main Menu, highlight
Logical Drive Management
and press Enter.
2.
Highlight the logical drive you want and press Enter.
3.
Highlight
Background Activity
and press Enter.
4.
Highlight
Start Redundancy Check
and press Enter.
The redundancy check parameters appear.
•
Auto Fix – Corrects inconsistencies automatically
•
Pause On Error – Pauses the Redundancy Check when an error is
found
To change a parameter, highlight it and press the backspace toggle between
Yes
and
No
.
5.
Highlight
Start
and press Enter.
If necessary, you can pause and resume or stop and restart the Redundancy
Check. You can use the logical drive while Redundancy Check is running.
Locating a Logical Drive
This feature helps you identify the physical drives assigned to the logical drive
you are working with in the CLU. To locate a logical drive:
1.
From the Main Menu, highlight
Logical Drive Management
and press Enter.
2.
Highlight the disk array you want and press Enter.
3.
Highlight
Locate Logical Drive
and press Enter.
The drive status LEDs for the physical drives in this logical drive will blink for
one minute.
Summary of Contents for VTRAK M610p
