![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266137.webp)
Chapter 5: Management with the CLU
125
5.
Make the following settings as required:
•
Type and alias into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between words
and underscore. An alias is optional.
•
Highlight
Coercion
and press the spacebar to toggle between
Enable
and
Disable
.
•
Highlight
Coercion Method
and press the spacebar to toggle through:
GB Truncate
– Reduces the capacity to the nearest 1 GB boundary
10 GB Truncate
– Reduces the capacity to the nearest 10 GB boundary
Grp (group) Rounding
– Uses an algorithm to determine truncation.
Results in the maximum amount of usable drive capacity
Table Rounding
– Applies a predefined table to determine truncation
•
Highlight
Cache Flush Interval
and press the backspace key to erase
the current value. Type a new interval value (1 to 12 seconds).
•
Highlight
SMART
and press the spacebar to toggle between
Enable
and
Disable
.
•
Highlight
SMART Poll Interval
and press the backspace key to erase the
current value. Type a new interval value (1 to 1440 minutes).
•
Highlight
Adaptive Writeback Cache
and press the spacebar to toggle
between Enabled and Disabled.
6.
Press Ctrl-A to save your settings.
Locating the Controller
To locate this controller:
1.
From the Main Menu, highlight
Subsystem Management
and press Enter.
2.
Highlight
Controller Management
and press Enter.
3.
Highlight the controller you want and press Enter.
4.
Highlight
Controller Settings
and press Enter.
5.
Highlight
Locate Controller
and press Enter.
Controller Dirty Cache
LED and Status
LED, on the back of the
Controller, will flash for one minute.
Summary of Contents for VTRAK M610p
