![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266185.webp)
Chapter 5: Management with the CLU
173
Restarting the Subsystem
There are two methods for restarting the subsystem. Choose one of the following
procedures:
•
Restarting the Subsystem (page 173)
•
Restarting VTrak – Serial Connection (page 173)
Restarting VTrak – Telnet Connection
This function enables you to restart the VTrak subsystem on a Telnet connection.
You can only do part of this procedure in the CLU. Additional action is required,
as described below. To restart the VTrak:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Shutdown or Restart
and press Enter.
3.
Highlight
Option
and press the spacebar to display
Restart
.
4.
Highlight
Submit
and press Enter.
A warning message appears.
5.
Press Y to continue.
The screen will go blank.
6.
Wait for no less than two minutes.
7.
Re-establish your Telnet connection to the VTrak CLU.
If you cannot re-establish a connection, wait 30 seconds, then try again.
Restarting VTrak – Serial Connection
This function enables you to restart the VTrak subsystem on a serial connection.
You can only do part of this procedure in the CLU. Additional action is required,
as described below. To restart the VTrak:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Shutdown or Restart
and press Enter.
3.
Highlight
Option
and press the spacebar to display
Restart
.
4.
Highlight
Submit
and press Enter.
A warning message appears.
5.
Press Y to continue.
The screen will display shutdown and startup functions.
6.
When the
Login:
prompt appears, log into the CLU again.
Summary of Contents for VTRAK M610p
