manualshive.com logo in svg

Promise Technology VTRAK M610p, Product Manual

Share
Download
Promise Technology VTRAK M610p Product Manual Download Page 191

Chapter 6: Maintenance

179

1.

From the Main Menu, highlight 

Additional Info and Management

, and press 

Enter.

2.

Highlight 

Shutdown or Restart

 and press Enter.

3.

Press the spacebar to display 

Restart

 then press Enter.

A warning message appears.

4.

Press Y to continue.

The screen will go blank.

5.

Wait for two to three minutes.

6.

Re-establish your Telnet connection to the VTrak CLU.

If you cannot re-establish a connection, wait 30 seconds, then try again.

Restarting Subsystem over a Serial Connection

To restart the VTrak subsystem on a serial connection:

1.

From the Main Menu, highlight 

Additional Info and Management

, and press 

Enter.

2.

Highlight 

Shutdown or Restart

 and press Enter.

3.

Press the spacebar to display 

Restart

 then press Enter.

A warning message appears.

4.

Press Y to continue.

The screen will display shutdown and startup functions.

5.

When the 

Login:

 prompt appears, log into the CLU again.

Warning

Do not restart the VTrak during a firmware upgrade procedure. 
Wait until the upgrade is one and you are prompted to restart.

Summary of Contents for VTRAK M610p





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands