![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266079.webp)
Chapter 4: Management with WebPAM PROe
67
2.
Click the Administrative Tools
icon.
3.
Click the
SNMP Management
link in Management View.
4.
Enter the SNMP Port number.
161 is the default.
5.
Enter a System Name.
There is no default name.
6.
Enter a System Location.
USA is the default.
7.
Enter a System Contact (the email address of the administrator or other
individual).
8.
Enter the Read Community.
Public is the default.
The Write Community is always Private.
To add a Trap Sink, see “Adding Trap Sinks” below.
9.
Click
OK
in the confirmation box to restart the SNMP service with your
changes.
Adding Trap Sinks
To add a trap sink:
1.
Enter a Trap Sink IP address.
2.
Select a Trap Filter, select the lowest level of Severity to be reported for
each event.
See “Setting-up User Event Subscriptions” on page 54 for an explanation of
the Severity levels.
3.
Click the
Update
button.
The new trap sink appears in the Trap Sinks list.
4.
Click the
Submit
button.
5.
Click
OK
in the confirmation box.
Deleting Trap Sinks
To delete a trap sink:
1.
Highlight the trap sink you want to delete from the list.
2.
Click the
Delete
button to remove the trap sink from the list.
3.
Click the
Submit
button.
4.
Click
OK
in the confirmation box.
Changing the Startup Setting
1.
Under Startup Type:
Summary of Contents for VTRAK M610p
