Chapter 5: Management with the CLU
167
3.
Highlight
Message Event Severity Filter
and press the spacebar to change
severity levels.
4.
Press Ctrl-A to save your settings.
Deleting a Recipient
To delete a recipient:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Software Management
and press Enter.
1.
Highlight the recipient you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing
2.
Highlight
Delete Marked Entries
and press Enter.
Netsend Requirements
In order to use Netsend:
•
Netsend must be running the VTrak
•
You must provide the IP address for each recipient PC
•
The Messenger service must be running on each recipient PC
If your Netsend and Messenger service settings are correct but the recipient PC
does not receive event messages, check the recipient PC’s Firewall settings.
Refer to your OS documentation for more information.
Summary of Contents for VTRAK M610p
