![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266175.webp)
Chapter 5: Management with the CLU
163
Making Telnet Settings
By default, Telnet service is set to Automatic and its normal status is Started. To
make Telnet service settings:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Software Management
and press Enter.
3.
Highlight
Telnet
and press Enter.
4.
Highlight
Startup Type
and press the spacebar to toggle between
Automatic
and
Manual
.
5.
Highlight the following and press the backspace key to erase the current
value, then type the new value:
•
Port number – 2300 is the default
•
Session Time Out – 24 minutes is the default. 1440 minutes = 24 hours
•
Maximum number of connections – 4 is the default
6.
Press Ctrl-A to save your settings.
To start, stop or restart the Telnet service, highlight
Start
,
Stop
, or
Restart
and
press Enter.
Making SNMP Settings
By default, SNMP (Simple Network Management Protocol) service is set to
Automatic and its normal status is Started.
To make SNMP service settings:
1.
From the Main Menu, highlight
Additional Info and Management
and press
Enter.
2.
Highlight
Software Management
and press Enter.
3.
Highlight
SNMP
and press Enter.
4.
Highlight
Startup Type
and press the spacebar to toggle between
Automatic
and
Manual
.
5.
Highlight the following and press the backspace key to erase the current
value, then type the new value:
•
Port Number – 161 is the default
•
System Name – (optional) Type a system name in this field
•
System Location – Type a country name in this field
•
System Contact – Type the email address of your system administrator
in this field
•
Read Community – Type a community name in this field
•
Write Community – private (no change possible)
Summary of Contents for VTRAK M610p
