Chapter 5: Management with the CLU
143
Deleting a Logical Drive
To delete a logical drive from a disk array:
1.
From the Main Menu, highlight
Disk Array Management
and press Enter.
2.
Highlight the disk array that contains the logical drive you want to delete and
press Enter.
3.
Highlight the logical drive you want to delete and press the spacebar to mark
it.
The mark is an asterisk (*) to the left of the listing.
4.
Highlight
Delete Marked Logical Drives
and press Enter.
5.
Press Y to confirm the deletion.
Note
If you did not use all of the available capacity of the disk array, you
can create an additional logical drive at this point.
Caution
When you delete a logical drive, you delete all the data it contains.
Back up all important data before deleting a logical drive.
Summary of Contents for VTRAK M610p
