Promise Technology VTRAK M610p Product Manual Download Page 192

Page: 192 / 284

VTrak M610p Product Manual

180

Replacing a Power Supply

The power supply and its fans are replaced as one unit. There are no individually
serviceable parts. No tools are required for this procedure.

Remove the Old Power Supply

To remove the power supply:

Verify that the power supply LED is amber or red.

Switch off the power.

Unplug the power cord.

Press the release button and pull the handle downward as shown. See
Figure 1.

Pull the power supply out of the VTrak enclosure.

Install a New Power Supply

To install the power supply:

Carefully slide the power supply into the enclosure.

Gently press the handle in and upward until it locks. See Figure 1.

Plug in the power cord.

Switch on the power supply.

Verify that the new power supply LED is green.

Figure 1. Replacing a VTrak power supply

This completes the power supply replacement procedure.

Summary of Contents for VTRAK M610p





























































































































































































































































































Search results

Summary of Contents for VTRAK M610p

Reviews:

Brands by name

Popular brands

Promise Technology VTRAK M610p, Product Manual

Search results

Summary of Contents for VTRAK M610p

Reviews:

Brands by name

Popular brands