![background image](http://html.mh-extra.com/html/promise-technology/vtrak-m610p/vtrak-m610p_product-manual_1617266196.webp)
VTrak M610p Product Manual
184
Replacing a Cache Battery
The cache battery is located inside the Cooling Unit. The battery is replaced as
an individual part.
To replace a cache battery:
1.
Verify that the Battery LED is amber or red.
Figure 8. Battery LED
2.
Press the release button and pull the handle downward as shown above.
3.
Pull the cooling unit out of the VTrak enclosure.
Cautions
•
Try reconditioning the battery before you replace it. See
page 85 or page 128 for more information.
•
The battery assembly is replaced as a unit. Do not attempt to
disconnect the battery by itself.
•
Installing the wrong replacement battery can result in an
explosion.
•
Dispose of used batteries according to the instructions that
accompany the battery.
•
While the battery is removed, your system will be vulnerable
to data loss if the power fails while data is being written to the
logical drives.
•
If power service has failed, do not remove the cooling unit if
the Controller’s Dirty Cache LED is flashing. See “Browser
Does Not Connect to WebPAM PROe” on page 251.
Battery LED
Summary of Contents for VTRAK M610p
