manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

Server Log-On & Log-Off

OPERATOR PROCEDURES

Secret Server Numbers

For maximum security, servers can be assigned a secret server number that does not

display or print. This number can be one to seven digits long. If your system has been set

up for this type of log-on, press the SERVER key, enter your secret server number, then

press SERVER again.

       

 [ server # ] 

 

SVR

SVR

Employee Card Log-On

If you use the magnetic card reader for log-on, each server is issued an employee card. To

log-on, you press the SERVER key. Then run (or "swipe") your card through the reader.

        

[ swipe card ]

SVR

Server Log-Off

In many applications, the server number automatically logs off after each transaction. If

so, you need not use the server log-off procedure.

If your number stays on the system until you leave, you must log off at the end of your

shift. This helps prevent others from using your number while you are away. The

procedure you use for log-off depends upon the procedure you use for log-on. 

If you are using individual server keys or coded server numbers, enter zero (0) and press

SERVER to log off of the workstation.

        

0

SVR

If you are using secret server numbers or an employee card for log-on, press the SERVER

key. Enter zero (0), then press SERVER again to log off of the workstation.

        

        

SVR

0

SVR

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

2-5

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

IBM 2254 Hardware Maintenance Manual preview
2254
Brand: IBM Pages: 252
IBM NetVista A40 Guía Del Usuario preview
NetVista A40
Brand: IBM Pages: 158
Acer Aspire T135 Guia Do Usuário preview
Aspire T135
Brand: Acer Pages: 24
Quanmax QDSP-0200 Series User Manual preview
QDSP-0200 Series
Brand: Quanmax Pages: 39
Acrosser Technology AR-ES5432FL Installation Manual preview
AR-ES5432FL
Brand: Acrosser Technology Pages: 17
Compaq Presario 6500 Manual preview
Presario 6500
Brand: Compaq Pages: 2
Sharp PC-4702 Service Manual preview
PC-4702
Brand: Sharp Pages: 83
Sharp PC-1500A Instruction Manual preview
PC-1500A
Brand: Sharp Pages: 168
Sony SVT111 Safety Regulations preview
SVT111
Brand: Sony Pages: 32
Sony SVJ20213CXW User Manual preview
SVJ20213CXW
Brand: Sony Pages: 398
Sony SVF14A1 User Manual preview
SVF14A1
Brand: Sony Pages: 437
Sony SVF13N1 User Manual preview
SVF13N1
Brand: Sony Pages: 479
HP RY883AA#ABA - Compaq Presario - SR5002HM Specifications preview
RY883AA#ABA - Compaq Presario - SR5002HM
Brand: HP Pages: 1
HP RY883AA#ABA - Compaq Presario - SR5002HM Quick Start preview
RY883AA#ABA - Compaq Presario - SR5002HM
Brand: HP Pages: 2
HP Envy Recline23 TouchSmart Beats SE All-in-One Disassembly Instructions preview
Envy Recline23 TouchSmart Beats SE All-in-One
Brand: HP Pages: 5
HP ENVY Phoenix 850 Disassembly Instructions Manual preview
ENVY Phoenix 850
Brand: HP Pages: 11
HP RN635AA#ABA Brochure preview
RN635AA#ABA
Brand: HP Pages: 2
HP Envy Phoenix 800 Disassembly Instructions Manual preview
Envy Phoenix 800
Brand: HP Pages: 11

Brands by name

Popular brands

Load more brands