manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

MANAGER OPERATIONS

Inventory

Inventory Notes

Your inventory entries are reported in X1 Mode with Report 13 and at System Close.

Theoretical Usage, Variance, Efficiency, and Labor cost calculations are provided, along

with any adjustments you have entered during the course of the day. The timing of the

adjustments determine which totals are updated, as shown on the next several pages.

This inventory system is perpetual and maintains data from the time you initially set up

your ingredients and recipes and begin using the workstations. If it becomes necessary to

reset Period-to-Date Inventory data, be sure to reset Period-to-Date data for PLUs first.

Inventory Reporting

A.

If you enter it during System Close, Actual Inventory updates the END total. In

the example below, the Actual Inventory entry = 1000.00.

                                                       
                           
            Ingredient     #001 STEAK  
                          BEGIN .00  
                          USAGE -1000.00  
                          END 1000.00     Actual Inventory Entry
                          VR+/- 1000.00  
                                                       

B.

The END total becomes the BEGIN total at System Open.

                                                       
                           
                          #001 STEAK  
                          BEGIN 1000.00  
                          SHELF 1000.00  
                           
                                                       

C.

Actual Inventory entered during System Open is reported in the BEGIN total, as

shown above.

D.

Receipts update the RCPT total and increase the Shelf count.

                                                       
                           
                          #001 STEAK  
                          BEGIN 1000.00  
              Receipts      RECPT 100.00  
                          SHELF 1100.00  
                                                       

4-52

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

IBM PC 300PL Types 6862 Installation Manual preview
PC 300PL Types 6862
Brand: IBM Pages: 112
Digiop Desktop Hardware Quick Start Manual preview
Desktop Hardware
Brand: Digiop Pages: 2
ASROCK iBOX-345-DL User Manual preview
iBOX-345-DL
Brand: ASROCK Pages: 43
DIGITAL YACHT Aqua Compact Pro Installation And Instruction Manual preview
Aqua Compact Pro
Brand: DIGITAL YACHT Pages: 5
Compaq Pavilion Slimline s5500 - Desktop PC Reference Manual preview
Pavilion Slimline s5500 - Desktop PC
Brand: Compaq Pages: 36
MSI AP190 User Manual preview
AP190
Brand: MSI Pages: 53
NEC 2000 Series User Manual preview
2000 Series
Brand: NEC Pages: 127
Craftsman Essentio CG5275 User Manual preview
Essentio CG5275
Brand: Craftsman Pages: 26
Craftsman 714.68658 User Instructions preview
714.68658
Brand: Craftsman Pages: 8
Siemens INOX PRO SIMATIC IPC277D Operating Instructions Manual preview
INOX PRO SIMATIC IPC277D
Brand: Siemens Pages: 182
Siemens SIMATIC IPC627C Getting Started preview
SIMATIC IPC627C
Brand: Siemens Pages: 52
Siemens M440 Troubleshooting Manual preview
M440
Brand: Siemens Pages: 32
Siemens INOX PRO SIMATIC IPC277D Service Manual preview
INOX PRO SIMATIC IPC277D
Brand: Siemens Pages: 25
Siemens simatic ipc227e Operating Instructions Manual preview
simatic ipc227e
Brand: Siemens Pages: 156
Siemens SIMATIC Box PC 620 Manual preview
SIMATIC Box PC 620
Brand: Siemens Pages: 226
Larson Electronics SPG-4G-18-8-FM Instruction Manual preview
SPG-4G-18-8-FM
Brand: Larson Electronics Pages: 2
NexAIoT NISE 109 User Manual preview
NISE 109
Brand: NexAIoT Pages: 71
Kensington SmartFit K55792 Instruction Manual preview
SmartFit K55792
Brand: Kensington Pages: 10

Brands by name

Popular brands

Load more brands