manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

Time Range Program

MANAGER PROGRAMS

3.

Enter the new starting and ending times for the range address you selected. Enter

the new range with the sequence shown below.

[ ___ ___ ___ ___ ___ ___ ___ ___ ] 

 

CASH

- start time - | - end time -

Note: Time Ranges are 8-digit entries, with a 4-digit starting time and a 4-digit ending

time. (Except for the 300 series which have a 4-digit entry.) A range that goes from

10:00 a.m. to 1:00 p.m. is entered as 10001300 CASH. Sales cannot be accumulated

in more than one range; that is, if you program a 9:00-11:00 range, you cannot

program a second range to report 10:00-10:30 sales.

Remember to use military time for afternoon and evening time entries. For example,

Noon = 1200, 1:00 p.m. = 1300, 2:00 p.m. = 1400, 3:00 p.m. = 1500, 4:00 p.m. = 1600

... 9:00 p.m. = 2100, 10:00 p.m. = 2200, 11:00 p.m. = 2300, and Midnight = 0000.

When you enter a time range, the system automatically steps down to the next

available address. 

4.

Repeat the Step 3 procedure to change the displayed time range. Or repeat Steps 2

and 3 to change a different time range.

5.

Press CASH to return to the P1 Mode menu. You can select another option from

this menu, if necessary.

    

CASH

6.

Press CASH again to return to the MGR Mode menu.

    

CASH

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0 

5-33

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

EBN BPC03-B-2930 Service Manual preview
BPC03-B-2930
Brand: EBN Pages: 9
Nanoxia Deep Silence 6 Revision B User Manual preview
Deep Silence 6 Revision B
Brand: Nanoxia Pages: 24
IBM ThinkCentre 8104 Hardware Replacement Manual preview
ThinkCentre 8104
Brand: IBM Pages: 38
IBM System x3200 M3 Product Manual preview
System x3200 M3
Brand: IBM Pages: 42
Quanmax KUBE-8020 User Manual preview
KUBE-8020
Brand: Quanmax Pages: 63
MAXDATA Workstation Fusion 7000 User Manual preview
Workstation Fusion 7000
Brand: MAXDATA Pages: 46
Digital Equipment PDP-12 Reference Manual preview
PDP-12
Brand: Digital Equipment Pages: 321
IBASE Technology CSB200-898 User Manual preview
CSB200-898
Brand: IBASE Technology Pages: 87
Matrox 4Sight GPm Installation And Hardware Reference preview
4Sight GPm
Brand: Matrox Pages: 174
Gateway E-1000 Series User Manual preview
E-1000 Series
Brand: Gateway Pages: 50
Vecow EAC-5000 User Manual preview
EAC-5000
Brand: Vecow Pages: 65
NEC READY ES PRO Manual preview
READY ES PRO
Brand: NEC Pages: 110
NEC ShieldPRO N22A Specifications preview
ShieldPRO N22A
Brand: NEC Pages: 2
NEC PowerMate VT 300i Series Service And Reference Manual preview
PowerMate VT 300i Series
Brand: NEC Pages: 190
NEC PowerMate Ready ES Pro User Manual preview
PowerMate Ready ES Pro
Brand: NEC Pages: 109
NEC Ready 9734ES Pro Service And Reference Manual preview
Ready 9734ES Pro
Brand: NEC Pages: 76
NEC POWERMATE VT 300 RELEASE NOTES Manual preview
POWERMATE VT 300 RELEASE NOTES
Brand: NEC Pages: 192
NEC SA2500 User Manual preview
SA2500
Brand: NEC Pages: 253

Brands by name

Popular brands

Load more brands