manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

Tax Shift

OPERATOR PROCEDURES

Note: If you press one of the TAX SHIFT keys before you press a payment key, you strip

the tax from the entire transaction. You can selectively remove tax by pressing a

specific TAX SHIFT key before the item or payment. For example, to strip Tax 1 and

Tax 2 from an item, enter: TAX SHIFT 1, TAX SHIFT 2, then press the item. To

remove all taxes from the entire transaction, you can also use the Tax Exemption

procedure, described on the next page.

Tax Exemption

To remove all sales tax from your transaction, you can use the Tax Exemption procedure.

Tax Exemption is performed with the NO TAX key. You can press NO TAX at any point

in the transaction. It strips the tax from all items you have already entered and all items

you enter later in the transaction. Once you press NO TAX, you cannot reverse it; all

items in the transaction are registered tax-free.

Press NO TAX.

NO

TAX

Note: If you have more than one tax rate, you can use the TAX SHIFT keys to strip one tax

at a time. The NO TAX key removes all sales taxes.

Payment

Your keyboard includes keys corresponding to the forms of payment your restaurant

accepts. The procedures for payment depend on the type of tender: Cash, Check, or

Charge. Refer to the type of tender needed for your transaction.

Cash Payment

Exact Tender:

If the customer gives you the exact amount of cash they owe, you can

simply press CASH to close the transaction.

CASH

Note: If "Enter Amount" displays, this procedure has been disabled for your system. You

must use the Amount Tender procedure, described below.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

2-43

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

IBM 2254 Hardware Maintenance Manual preview
2254
Brand: IBM Pages: 252
Alienware Area-51 R5 Setup And Speci?Cations preview
Area-51 R5
Brand: Alienware Pages: 21
MSI MPC 865 Quick Installation Manual preview
MPC 865
Brand: MSI Pages: 123
Ruijie Networks Rain400 Series Manual preview
Rain400 Series
Brand: Ruijie Networks Pages: 30
Casio DT-300 Hardware Manual preview
DT-300
Brand: Casio Pages: 25
Dell OptiPlex XE3 Setup Manual preview
OptiPlex XE3
Brand: Dell Pages: 38
Dell OptiPlex XE2 Owner'S Manual preview
OptiPlex XE2
Brand: Dell Pages: 61
Dell OptiPlex XE3 Service Manual preview
OptiPlex XE3
Brand: Dell Pages: 70
Dell Precision 450N Setup And Quick Reference Manual preview
Precision 450N
Brand: Dell Pages: 208
Dell Precision 8F765 Setup And Quick Reference Manual preview
Precision 8F765
Brand: Dell Pages: 260
Dell Precision 8F764 Setup And Quick Reference Manual preview
Precision 8F764
Brand: Dell Pages: 152
Dell Precision M2800 Owner'S Manual preview
Precision M2800
Brand: Dell Pages: 81
Dell Precision D490 Quick Reference Manual preview
Precision D490
Brand: Dell Pages: 124
Dell Precision 8T146 Setup And Quick Reference Manual preview
Precision 8T146
Brand: Dell Pages: 96
Dell Precision 9T217 Setup And Quick Reference Manual preview
Precision 9T217
Brand: Dell Pages: 170
Dell Precision K8642 Quick Reference Manual preview
Precision K8642
Brand: Dell Pages: 138
Dell Precision JD967 Quick Reference Manual preview
Precision JD967
Brand: Dell Pages: 240
Dell P104F Service Manual preview
P104F
Brand: Dell Pages: 113

Brands by name

Popular brands

Load more brands