Panasonic 5000 Series Operating Instructions Manual Download Page 60

Page: 60 / 309

Coupons

OPERATOR PROCEDURES

Press the COUP key.

Next, press the item associated with this coupon.

COUP

STEAK

SAND

Note: If you have not entered the item this coupon affects, an "Invalid" (or similar)

message displays. Enter the item, then retry the coupon entry.

Your system displays the coupon with its programmed description.

1 STEAK SN

7.95

11:15 LVL1 REG

1 -SNDCOUP

- .95

TABL2 #GST2
#003

TAX .28
TOTL 7.28

SAM
DAVE

Open Coupons

If you have several different coupons, your coupon key can be programmed to accept an

open entry. An Open Coupon key allows you to specify the applicable coupon amount. Use

this procedure for this type of coupon. Before you attempt the open coupon procedure,

make sure you register the item the coupon affects.

After you register the item, enter the amount of the coupon.

Press COUP.

Press the item to which the coupon applies.

[

amount

]

COUP

HAM &

CHEZ

If your coupon was accepted, it shows on the first available line of your screen. If a "Non-

eligible" (or similar) message displays, make sure you registered the item to which the

coupon applies. Your manager can confirm whether or not the coupon has been

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

2-29

Summary of Contents for 5000 Series






















































































































































































































































































































Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands

Panasonic 5000 Series, Operating Instructions Manual

Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands