manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 162 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 162

MANAGER OPERATIONS

Inventory

Transfer-In

Transfer-In entries record inventory transferred to your restaurant from another

restaurant. To record Transfer-In entries during the day, use the procedure described

below. You can also enter Transfers at System Close and System Open. 

1.

With the keylock at the System Master in MGR Mode, use these steps to go into

the X1 Terminal Report screen.

        

        

        

1

CASH

2

CASH

2.

Use this sequence to advance to the Inventory Data Input screen.

        

        

        

        

1

3

CASH

1

CASH

3.

Enter the number of the ingredient you transferred in from another location. 

4.

Press CSHR.

       [ ingredient # ] 

CSHR

     ING# 2 CHICKEN

  23:12 LVL1

   

** INVENTORY **

     1 ACT INV 0000.00
     2 RECEIPT 0000.00

(ING#) CSHR

     3 TRNS IN 0000.00

(MENU#) SBTL

     4 TRNS OUT 0000.00

(Q'TY) CASH

     5 WASTE 0000.00

     PAUL

5.

Move the cursor to the Transfer In line (line 3).

        

3

SBTL

4-46

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments