Panasonic 5000 Series Operating Instructions Manual Download Page 119

Page: 119 / 309

Manager Override

MANAGER OPERATIONS

Manager Override

Many of the operations described in Sections 2 and 3 can be programmed to require

manager authorization. The function is not allowed without manager approval. The

operations that may include this restriction are noted throughout the first sections.

Some operations display "Call Manager" only under certain circumstances. The SERVICE

key, for example, is usually available to everyone who operates the system. If, however,

you try to close a check with a credit balance, the Service operation may prompt for a

manager. A second example is the CHECK PRINT key. Normally, Check Print does not

require a manager. However, Check Print may ask for a manager if someone attempts to

print a check more than once.

Manager approval may also be needed when a limit is exceeded. You may, for example,

have a $1.00 limit on your coupons or a $10.00 limit on an open gift certificate. An

authorized person or manager can override these limits, if necessary.

Use the next procedure whenever a REG Mode operation displays the "Call Manager"

message.

Turn your workstation keylock to the MGR position and repeat the portion of the

transaction that requires manager approval.

[ turn to MGR Mode ]

Notes:

Remember to turn the keylock back to REG Mode when the manager part of

the transaction is completed.

You may also be able to override the manager authorization without

turning the keylock to MGR Mode. If your system allows, you can use the

following procedure to override the "Call Manager" message. Leave the

keylock in REG Mode, then log on your manager number. Perform the part

of the transaction that requires manager approval. Log the cashier back

onto the system.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

4-3

Summary of Contents for 5000 Series






















































































































































































































































































































Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands

Panasonic 5000 Series, Operating Instructions Manual

Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands