manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 264 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 264

Date & Time Program

MANAGER PROGRAMS

Program 33: Date & Time Program

After the date and time are initially set at your workstations, you should not normally

need to make changes. An exception would be the change needed for the start and end of

Daylight Savings, where applicable. Use Program 33 to change either the date or the time

at a particular workstation.

1.

With the keylock in MGR position, enter this sequence to select the Date & Time

program.

        

        

        

        

5

CASH

3

3

CASH

2.

To change the date, enter the new date

3.

Press CASH.

Note: Enter two digits for the Month, two digits for the Day, and two digits for the Year.

For example, January 2, 1994 = 010294.

        

 [ date ] 

 

CASH

4.

To change the time at this workstation, enter the new time in hhmm format. 

5.

Press SBTL.

Note: Remember to use military time for afternoon and evening hours. For example, Noon

= 1200, 1:00 p.m. = 1300, 2:00 p.m. = 1400, 3:00 p.m. = 1500, 4:00 p.m. = 1600...

10:00 p.m. = 2200, 11:00 p.m. = 2300, Midnight = 0000.

      

[ time ]

 

SBTL

6.

Press CASH twice to return to the MGR Mode menu.

        

CASH

CASH

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0 

5-45

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments