Panasonic 5000 Series Operating Instructions Manual Download Page 286

Page: 286 / 309

Employee Program

MANAGER PROGRAMS

Job Code & Pay Rate 2

Job Code:

Use the first two digits of this field to list a second job code

this employee can use when they clock-in (if necessary).

Pay Rate:

Enter the pay rate number (from Program 56) associated with

the job code you entered in the first two digits of this field.

[ job code # ]

[ pay rate # ]

CASH

Job Code & Pay Rate 3

Job Code:

Use the first two digits of this field to list a third job code that

applies to this employee (if necessary).

Pay Rate:

Enter the pay rate number (from Program 56) associated with

the job code you entered in the first two digits of this field.

[ job code # ]

[ pay rate # ]

CASH

Job Code & Pay Rate 4

Job Code:

Use the first two digits of this field to list a fourth job code

that applies to this employee (if necessary).

Pay Rate:

Enter the pay rate number (from Program 56) associated with

the job code you entered in the first two digits of this field.

[ job code # ]

[ pay rate # ]

CASH

Status

Select options that apply to this employee. You can add the values, if

necessary.

1= Require a job code entry at each Clock-in. If not set, a job code entry is

optional, and the default job code (assigned in Job 1, above) is activated,

unless another job code is specified at clock-in.

2= Require a tip entry when this employee clocks out.

Repeat Steps 2 through 5 for each employee you must program or change.

To leave this program, press CASH twice.

CASH

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

5-67

Summary of Contents for 5000 Series






















































































































































































































































































































Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands

Panasonic 5000 Series, Operating Instructions Manual

Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands