Panasonic 5000 Series Operating Instructions Manual Download Page 272

Page: 272 / 309

PLU Program

MANAGER PROGRAMS

Line 11:

Product Mix

You can link this item to as many as two Product Mix Groups. Use Product

Mix numbers from Program 28. Both of these entries are optional.

Mix2:

Enter the secondary Product Mix Group number for this item.

Mix1:

Enter the primary Product Mix Group number for this item. The group

number you enter in this field can track any special piece counts you later

specify in Line 10.

Line 12:

Recipe #

Enter the number of the recipe (from Program 55) you are using for this

item. Or enter 0 if you are not using a recipe for this item.

Line 13:

Pieces

Enter up to 99 pieces added to the Product Mix Group counter (Line 8) each

time this item is registered. If, for example, you are programming a 2PC

Chicken Snack with Biscuit.

Mix2:

Enter a '2' in this field to update the Chicken Product Mix Group by two,

each time you register a 2PC Chicken Snack with Biscuit.

Mix1:

Enter a '0' or '1' to update the Biscuit Product Mix Group by one, each time

you register a 2PC Chicken Snack with Biscuit.

Note: Your entry in this field only updates the Product Mix Group number you enter in the

Mix 1 field.

Line 14:

Class Match #

This field works with your Line 15 entry to match modifiers (condiments) to

their applicable items. If you are programming a

condiment

modifier

, use

this line to enter its class match number (0-255).

Note: If you are programming a main item (or a modifier that is linked to a modifier),

enter its class code in Line 4.

Class #255 is a "wild card" modifier. You can assign it to a condiment that

can match all class number settings. Use the following guidelines for your

Class # (Line 15) and Class Match # (Line 14) entries.

If you are programming an item, enter its Class # in Line 15.

If you are programming a modifier/condiment, enter its Class Match

# here.

If you are programming a secondary modifier (a modifier that is

linked to another modifier), enter its Class # in Line 15.

An example showing the Class # and Class Match # entries is provided on

the next page.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

5-53

Summary of Contents for 5000 Series






















































































































































































































































































































Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands

Panasonic 5000 Series, Operating Instructions Manual

Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands