manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 235 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 235

MANAGER PROGRAMS

Self-Tests

232C hardware installed in your system. An additional connector is required for this test.

1.

Turn the keylock MGR Mode.

2.

Enter this sequence to advance to the Self-Test menu.

        

        

        

        

5

CASH

2

0

CASH

3.

Select the RS-232C test.

        

        

1

0

CASH

       *** RS232C TEST ***

           CH0: OK (or NG)
           CH1: OK (or NG)
           CH2: OK (or NG)

       *** TEST END ***

Note: You can have up to three RS-232C channels on your workstation. This test checks

each one. NG indicates that RS-232C is not functioning correctly or is not installed.

NG also displays if this test is taken without a direct-connect modem eliminator. 

4.

When you are ready to return to MGR Mode, press CASH twice.

        

CASH

CASH

Magnetic Card Reader Test

You can use this test to make sure your Magnetic Card Reader is accurately interpreting

5-16

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments