manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

Reports

MANAGER OPERATIONS

CASH

f)

System Close pauses here so you can make sure you have entered all

corrections. To go back into the Timekeeping Edit screen, press

CASH. Or, if you are sure you have entered all adjustments and are

ready to continue System Close, enter 1 and press CASH. System

Close now begins. It first accumulates the totals of all workstations

on your system (unless an error was detected and ignored in Step 3). 

        

           -or- 

1

CASH

CASH

(to continue System Close)

        

(to return to timekeeping)

It then stores the consolidated totals in the System Master.

                                                      
                     
                    * CLOSE REPORT *  
                     
                    DEPOSIT # 1    
                    -750.00     Deposit entries 
                       
                    * CLOSE REPORT *  
                     
                    **MED** Z1 158      Report Name
                    (Media Report totals)   & Reset Counter
                     
                    **PLU** Z1 158    
                    (PLU Report totals)     Accumulated Z
                    :     Reports 
                    :  
                    (last report)  
                     
                    -------------------------------  
                    * END OF CLOSE *  
                      
                                                      

Note: After System Close, your daily totals are stored in the System Master. See the

System Open procedure when you are ready to reset the daily totals.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

4-69

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

Avalue Technology HPS-621U4A Quick Reference Manual preview
HPS-621U4A
Brand: Avalue Technology Pages: 78
BSi FieldGo PCATX-R9 User Manual preview
FieldGo PCATX-R9
Brand: BSi Pages: 40
Gateway UC73 Reference Manual preview
UC73
Brand: Gateway Pages: 144
Tandy 26-3334 Service Manual preview
26-3334
Brand: Tandy Pages: 129
NEC POWERMATE ENTERPRISE - 10-1997 Manual preview
POWERMATE ENTERPRISE - 10-1997
Brand: NEC Pages: 270
MSI AP190 User Manual preview
AP190
Brand: MSI Pages: 53
Asus GL12CP User Manual preview
GL12CP
Brand: Asus Pages: 52
Asus ET2410IUTS Specifications preview
ET2410IUTS
Brand: Asus Pages: 2
Asus FX10CS User Manual preview
FX10CS
Brand: Asus Pages: 50
Asus ET24 Series User Manual preview
ET24 Series
Brand: Asus Pages: 48
Asus FX10CP User Manual preview
FX10CP
Brand: Asus Pages: 50
Asus G50AB User Manual preview
G50AB
Brand: Asus Pages: 83
Asus ET2702l series User Manual preview
ET2702l series
Brand: Asus Pages: 80
Asus ET2700I User Manual preview
ET2700I
Brand: Asus Pages: 44
Asus ET2700 series User Manual preview
ET2700 series
Brand: Asus Pages: 44
Asus ET2411 User Manual preview
ET2411
Brand: Asus Pages: 38
Asus G21CN User Manual preview
G21CN
Brand: Asus Pages: 48
Asus G15CX User Manual preview
G15CX
Brand: Asus Pages: 50

Brands by name

Popular brands

Load more brands