manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

MANAGER PROGRAMS

Self-Tests

        

4

                                                            
                    P1 20 CA  
                    *** ROM TEST ***  
                    MR2.0-0 93.08.06  
                    E985  
                    D0EF  
                    4E38  
                    F0B6  
                    *** TEST END ***  
                                                            

Note: The ROM version used for your system may vary from the above example. The check

sum depends upon the ROM version installed. Within your system, the versions and

check sums should be identical.

4.

When the test is finished, press CLEAR to advance to the Self-Test menu, where

you can select another test. 

5.

Press CASH to return to the MGR Mode menu.

           -or- 

CLEAR

Keyboard Test

Use the Keyboard Test to confirm that all positions on your keyboard are operable. As you

press a position on the keyboard the screen displays the associated hard key location code.

This location is used to identify the position when you take a printout of keyboard.

1.

Turn your keylock to MGR Mode.

2.

Enter this sequence to advance to the Self-Test menu.

        

        

        

           

5

CASH

2

0

CASH

3.

Select the Keyboard Test. Initially, your screen resembles the one shown here.

5-10

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

IBM NetVista A40 Guía Del Usuario preview
NetVista A40
Brand: IBM Pages: 158
C&T VCO-6000 User Manual preview
VCO-6000
Brand: C&T Pages: 99
Radio Shack TRS-80 Model 3 Operation And Reference Manual preview
TRS-80 Model 3
Brand: Radio Shack Pages: 276
Advantech UNO-4678 User Manual preview
UNO-4678
Brand: Advantech Pages: 38
Oracle MICROS Compact Workstation 310 Quick Assembly Manual preview
MICROS Compact Workstation 310
Brand: Oracle Pages: 2
Acer Veriton M4618G Service Manual preview
Veriton M4618G
Brand: Acer Pages: 120
NCD Explora 400 Series Installing Instructions preview
Explora 400 Series
Brand: NCD Pages: 62
NComputing L300 User Manual preview
L300
Brand: NComputing Pages: 95
NCR RealPOS 70XRT User Manual preview
RealPOS 70XRT
Brand: NCR Pages: 183
Scheppach 5907103900 Manual preview
5907103900
Brand: Scheppach Pages: 56
Scientific Development Corporation Minivac 601 Getting Acquainted preview
Minivac 601
Brand: Scientific Development Corporation Pages: 36
Silicon Graphics IRIS Indigo Owner'S Manual preview
IRIS Indigo
Brand: Silicon Graphics Pages: 228
Sony VAIO VPCSB31FX/R Specifications preview
VAIO VPCSB31FX/R
Brand: Sony Pages: 2
Sony VAIO VPCSB31FX/P Specifications preview
VAIO VPCSB31FX/P
Brand: Sony Pages: 2
Sony VAIO VPCSB31FX/L Specifications preview
VAIO VPCSB31FX/L
Brand: Sony Pages: 2
Sony VAIO VPCSC1AFM/S Specifications preview
VAIO VPCSC1AFM/S
Brand: Sony Pages: 2
Sony VAIO VPCSB31FX/W Specifications preview
VAIO VPCSB31FX/W
Brand: Sony Pages: 2
Sony VAIO VPCSB31FX/B Specifications preview
VAIO VPCSB31FX/B
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands