manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 127 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 127

Accounting Functions

MANAGER OPERATIONS

Deposits

Another accounting function listed in the X1 Mode menu is Deposit. This function allows

you to note your daily deposits. In many restaurants where this entry is required, System

Close procedure prompts you for a Deposit entry. This procedure is most often used when

the entry is optional.

1.

Turn your keylock to MGR Mode.

2.

Select the X (& PRGM) option. Your screen advances to the X1 Mode menu.

        

1

CASH

3.

Select Option 3. Your screen advances to the menu shown next.

        

3

CASH

  
  1 R/A 

11:15 LVL1 MGR

  2 R/A 2

     *** R/A & P/O ***

  3 P/O
  4 PICK-UP
  5 DEPOSIT
  6 TENDER CORRECT

   ANDY

Note: The option names on your screen may vary from the above example.

4.

Select the Deposit option. Your screen advances to the Deposit menu.

        

5

CASH

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

4-11

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments