manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 14 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 14

Keylock

SYSTEM OVERVIEW

System Overview

This section describes some of the basic components of your 5000 System. It includes a

feature summary overview, system specifications, keylock positions, keyboard, and

workstation key overview. 

Keylock

The 5000 Series has five keylock positions that determine the workstation operating

mode. In normal daily operations, for example, you turn the keylock to REG Mode. For

manager operations, you turn the keylock to MGR Mode. The keylock positions are

accessed by three different keys: REG, MGR, and PRG. You must have access to the

required key before you can turn to or from a particular position. The keylock positions

and their range of access are described in the following chart.

Keylock Positions and Operations (P2)

                                                                                      

                                                                      MGR

                                                                        

                                                                      REG (P3)

                                                                          

                                                                                      

   

 Closed:

Off or Idle

             Closed

    REG:

Operating (Registration) Mode 

    MGR:

Reports (X1, Z1, and Period-to-Date)

Training Mode

Restaurant-level Programs (P1)

    P2:

System Programs

    P3:

Keyboard Program

Note: P2 and P3 Modes are not marked on the keylock.

   

Key Access

   

REG:

Closed ---  REG

   MGR:

Closed ---  REG ---  MGR

   PRG:

Closed ---  REG ---  MGR ---  P2 ---  P3

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

1-1

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments