manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 45 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 45

OPERATOR PROCEDURES

Price Look-Ups

Preset Scale PLU

Scale items with consistent pricing can be programmed with a preset price. If, for

example, you sell salad bar items by the pound (and the price is $1.60/lb. regardless of the

salad selections), you can have a preset Salad Bar key. To register the item, the system

multiplies the item weight by the preset price. Use the following procedure for Scale

PLUs with preset prices.

Place the item on the scale. When the weight has settled, press SCALE. Then press the

Preset PLU key. In the following example, the Salad Bar key is a preset Scale PLU.

[

 place item on scale 

]

 

 

SCALE

SALAD

BAR

Note: If the scale has not settled when you press the Preset PLU key, you see an error

message. This is because the workstation cannot get a reading of the weight it must

use to determine the item cost. Make sure the scale weight has settled before you

press the Preset PLU key.

The item price is based on the weight and the preset price per pound.

  
  1 SALAD

3.47

    11:15 LVL1 REG
    TABLE #GST2
  #003

    TAX .13
    TOTL 3.60

   SAM
   DAVE

2-14

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments