manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 64 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 64

Universal % Keys

OPERATOR PROCEDURES

1.

Enter all the items ordered. 

2.

Press DISC SBTL.

3.

Press DISC.

        

        

        

        

HAM &

CHEZ

FRIES

T

SHIRT

DISC

SBTL

DISC

Note: The discount only applies to items programmed as discountable. MGR Mode may be

required for this type of discount.

Manual Discounts

If discount rates vary from transaction to transaction, your discount key may be set up for

a manual entry. With this type of discount, you must specify the percentage rate before

you press the Discount key. Manual Discount Keys can be performed by Item, by

Subtotal, or by Discount Subtotal. Refer to the procedure you need.

By Item:

Manual Item Discounts are applied to one item at a time. You must enter

the discount immediately after the item. This example shows a 25% manual

discount.

        

        

        

RIB

EYE

2

5

DISC

By 

Subtotal:

Use this procedure to apply a discount to all items you entered in the

transaction. 

1.

Enter all items ordered. 

2.

Press SBTL (Subtotal). 

3.

Enter the amount of the discount. 

4.

Press the Discount key. 

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

2-33

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments