manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

X1 Mode Programs

MANAGER OPERATIONS

Remote Steering

Another program listed on the X1 Mode Program menu is Remote Steering. This program

directs your menu item steer flags to the appropriate remote printer or video. Your POS

dealer usually defines the normal settings for this program. You may, however, need to

make changes to adjust to your high and low volume hours.

In the PLU Program, your menu items are assigned Steer Flags. Use the following

procedure to direct the Steer Flags to a remote (kitchen) printer or a kitchen video

monitor.

1.

Turn your keylock to MGR Mode.

2.

Select the X (&PRGM) option. Your screen advances to the X1 Mode menu.

        

1

CASH

3.

Select the Program option. The screen lists the X1 Mode programs. If "Enter

Manager" displays, you must enter your manager number before you can continue

with this procedure. (See the Manager Log-on Procedure.)

        

5

CASH

  
  1 PLU SHIFT 

11:15 LVL1 MGR

  2 ORDER # START

     ** X1 PROGRAM **

  3 REMOTE STEERING
  4 DRAWER ASSIGN 
  5 SERVER DISABLE
  6 GCK # START

   PAUL

4.

Select Remote Steering. The screen advances to the menu shown next.

        

3

CASH

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

4-33

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

Gateway DX4200-JB001A Hardware Reference Manual preview
DX4200-JB001A
Brand: Gateway Pages: 124
Compaq st5548 - Thin Client Quick Setup Manual preview
st5548 - Thin Client
Brand: Compaq Pages: 39
Everex Impact GD3300 User Manual preview
Impact GD3300
Brand: Everex Pages: 47
IBM PS/2 N51 SX HMR Hardware Maintenance Service preview
PS/2 N51 SX HMR
Brand: IBM Pages: 43
VisuNet XT-9700 User Manual preview
XT-9700
Brand: VisuNet Pages: 81
IBM System/370 Manual preview
System/370
Brand: IBM Pages: 194
Siemens INOX PRO SIMATIC IPC277D Operating Instructions Manual preview
INOX PRO SIMATIC IPC277D
Brand: Siemens Pages: 182
Sony VGC-RA828G Quick Start Manual preview
VGC-RA828G
Brand: Sony Pages: 1
Sony VGC-RA825G Quick Start Manual preview
VGC-RA825G
Brand: Sony Pages: 1
Sony VGC-RA820G Specifications preview
VGC-RA820G
Brand: Sony Pages: 1
Sony VGC-RA826G Quick Start Manual preview
VGC-RA826G
Brand: Sony Pages: 1
Sony VGC-RA716G VAIO Specifications preview
VGC-RA716G VAIO
Brand: Sony Pages: 1
Sony VGC-RA810G Specifications preview
VGC-RA810G
Brand: Sony Pages: 1
Sony VGC-LV290J/S Specifications preview
VGC-LV290J/S
Brand: Sony Pages: 2
Sony VGC-LV180J - Vaio All-in-one Desktop Computer User Manual preview
VGC-LV180J - Vaio All-in-one Desktop Computer
Brand: Sony Pages: 2
Sony VGC-LV170J - Vaio All-in-one Desktop Computer User Manual preview
VGC-LV170J - Vaio All-in-one Desktop Computer
Brand: Sony Pages: 2
Sony VGC-LV140J - Vaio All-in-one Desktop Computer User Manual preview
VGC-LV140J - Vaio All-in-one Desktop Computer
Brand: Sony Pages: 2
Sony VGC-LT38CE Specifications preview
VGC-LT38CE
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands