Panasonic 5000 Series Operating Instructions Manual Download Page 66

Page: 66 / 309

Universal % Keys

OPERATOR PROCEDURES

By Surcharge

Subtotal:

If your surcharge only applies to certain items in a transaction, use the

SRCH SBTL (Surcharge Subtotal) key. This key determines which items are

surchargeable and calculates the correct surcharge.

Enter all of the items ordered.

Press SRCH SBTL.

Press the SURCHARGE key.

SALAD

BAR

JUICE

SOUV

GLASS

SRCH

SBTL

SUR

CHRG

Note: If "Call Manager" or a similar message displays, your Surcharge key requires

manager authorization. The keylock must be turned to MGR Mode before you press

the Surcharge key.

Manual Surcharges

If the surcharge percentage rate varies from transaction to transaction, your Surcharge

key can programmed with a manual percentage. You must enter the percentage rate

before you press the Surcharge key. Manual Surcharges can be applied by Item, by

Subtotal, or by Surcharge Subtotal. Refer to the procedure you need.

By Item:

Item Surcharges affect only one item at a time. You must enter the

Surcharge immediately after the item it affects.

Enter the item.

Enter the percentage rate.

Press the SURCHARGE key. This example shows a 15% item surcharge.

PRIME

RIB

SUR

CHRG

Subtotal:

Subtotal Surcharges apply to all items entered in the transaction.

Enter all of the items ordered.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

2-35

Summary of Contents for 5000 Series






















































































































































































































































































































Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands

Panasonic 5000 Series, Operating Instructions Manual

Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands