manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

Sample Reports

MANAGER OPERATIONS

Report #2: Sales Time Report

                                                     
                          
                         **TIME**  
                         X1 28  
                         TIME=23:50     Previous Reset Time
                         -------------------------  
                         TIME RANGE %    
                         CNT NSTL   
                         LBH SPMH    Report Legend
                         LB%   
                         LB$ LB$ /C    
                         -------------------------  
               Range     08:30--09:00 10.6%     Sales %
               Count         21 375.95     Sales
         Labor Hours         1.25H 300.76     Sales per Man Hour
                         2.9%     Labor %
          Labor Cost         10.87 .52     Labor $ per Customer
                         09:00--09:30 12.9%   (or Guest Check)
                         27 459.00  
                         1.41H 325.53  
                         2.7%  
                         12.53 .46  
                         09:30--10:00 16.1%  
                         36 570.20  
                         2.00H 285.10  
                         3.2%  
                         18.25 .51  
                                                    

                                                     
                          
                         TOTAL  
          Count Total    229 3547.70     Net Sales Total
    Total Labor Hours      10.32H 343.76     Sales per Man Hour
                         2.6%     Labor % Total
     Labor Cost Total      92.06 .40     Labor Cost per
                                                      Customer

Labor information appears on this report only if Timekeeping is enabled on your system.

Labor data is calculated with the formulas shown below:

      Labor Cost (All Sales Time Report)

= Sum on-duty pay rates x Labor Hours

      Labor Cost (Timekeeping Report)

= Pay rate x Labor Hours

      Labor % (Both Reports)

= Labor Cost ÷ Net Sales x 100

      Sales per Man hour

= Sales ÷ Labor Hours

Note:

Your report can provide totals for up to forty-eight ranges. The ranges on your report

are set in the time intervals you need.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

4-77

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

Acer Veriton Hornet N260G User Manual preview
Veriton Hornet N260G
Brand: Acer Pages: 22
T-MAG K6 User Handbook Manual preview
K6
Brand: T-MAG Pages: 22
iFixit Mac Mini Model A1347 Teardown Manual preview
Mac Mini Model A1347
Brand: iFixit Pages: 13
Zotac ZBOX nano ID61 User Manual preview
ZBOX nano ID61
Brand: Zotac Pages: 28
NEC POWERMATE P - SERVICE 1996 Service And Reference Manual preview
POWERMATE P - SERVICE 1996
Brand: NEC Pages: 178
Jupiter H470 Quick Installation Manual preview
H470
Brand: Jupiter Pages: 2
Seeed ODYSSEY X86 User Manual preview
ODYSSEY X86
Brand: Seeed Pages: 9
Ergotron Desktop 16 User Manual preview
Desktop 16
Brand: Ergotron Pages: 12
Penpower Technology Wireless Pen User Manual preview
Wireless Pen
Brand: Penpower Technology Pages: 82
Grace Q-Zone Hoop-Grame Assembly & Use Instructions preview
Q-Zone Hoop-Grame
Brand: Grace Pages: 59
LEXIBOOK JC250SPGB Instruction Manual preview
JC250SPGB
Brand: LEXIBOOK Pages: 5
Vicon Valerus Shadow Elite Client Workstation Small Form Factor Quick Start Manual preview
Valerus Shadow Elite Client Workstation Small Form Factor
Brand: Vicon Pages: 2
Fujitsu Siemens Computers SCENIC S 2 Operating Manual preview
SCENIC S 2
Brand: Fujitsu Siemens Computers Pages: 72
Fujitsu Siemens Computers CELSIUS M430 Operating Manual preview
CELSIUS M430
Brand: Fujitsu Siemens Computers Pages: 90
Fujitsu Siemens Computers CELSIUS M Operating Manual preview
CELSIUS M
Brand: Fujitsu Siemens Computers Pages: 92
Shuttle NC10U User Manual preview
NC10U
Brand: Shuttle Pages: 26
VarTech Systems VTPC150VA User Manual preview
VTPC150VA
Brand: VarTech Systems Pages: 7
XDS 9300 Reference Manual preview
9300
Brand: XDS Pages: 85

Brands by name

Popular brands

Load more brands