manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 40 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 40

Person Number

OPERATOR PROCEDU

RES

Person #

You can use the Person # key to separate items by person. This entry can help expediters

serve the order to the appropriate person. Or, in a guest check tracking environment, it

can allow you to separate the check total for each person in the party. This entry can be

optional or required, depending upon your programming.

To record the person number, enter the person number and press PERSON #. Enter the

items associated with this person. Enter the next person #, press PERSON #, then enter

the items associated with this person.

[

 person # 

]

 

 

[

 items 

]

 . . .

PERSON

#

The person number displays above the items, as shown below.

  
 PRSN 1

11:15 LVL1 REG

  1 TOSS SAL

3.15

TABLE #GST2
#003

                               

TAX .19 
TOTL 3.34 

   SAM
   DAVE

Note: Your entry is limited by the number of guests you enter. If your system is set for true

person numbering, and you enter '2' for the number of guests, you can only enter

Person #1 and Person #2. If your system is set for "seat numbering", and you enter

'2' for the number of guests, you can use any two numbers.

If your entry is too low, or if additional guests join the party before the transaction

is finalized, you can increase the count (so you can increase the person numbers).

Enter the new number of guests and press the # GUEST key. 

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

2-9

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments