manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 114 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 114

Paying a Guest Check

APPLICATIONS

Check Paid for an Individual Person

If only one person in the party is leaving, use the following procedure to close his balance.

The remaining check balance remains open, so you can enter more items, if necessary.

1.

Make sure your server number is entered. 

2.

Enter the check number.

3.

Press CHECK PAID. 

4.

Enter the number of the person who is leaving.

5.

Press PRSN #.

6.

Enter the type of payment you received. Some examples of this procedure are

shown next.

  

[ check # ] 

 

 

[ person # ] 

 

 

CHECK

PAID

PRSN

#

CASH

  

 [ check # ]

 

 

 [ person # ] 

 

 

 [ charge tip ] 

 

CHECK

PAID

PRSN

#

AMEX

Check Paid for Combined Persons

The procedure below allows you to combine and close the balances of two or more persons

at a table. The remaining check balance stays open, so you can add items, if necessary.

1.

Make sure your server number is entered. 

2.

Enter the check number.

3.

Press CHECK PAID. 

4.

Enter the number of the first person who is leaving.

5.

Press PRSN #. 

6.

Enter the next person number.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

3-23

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments