manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 297 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 297

MANAGER PROGRAMS

Downline Programming

Program 60: Downline Programming

When you change any of the files in your workstation, you can use the Downline Program

to send the changes to all other workstations on your system. The explanations for this

program are divided into three sections: Downlining to All Workstations, Downlining to a

Single Workstation, and Downlining the PLU file. Refer to the procedure you need.

All of the Downlining procedures reference the Downline File numbers listed below.

Downline File Numbers

         

 0 Date & Time

          1 Subgroups

          2 All PLUs 

          3 Cashiers

          4 Product Mix 

          5 Messages & Prompts

          9 Coupons

14 Tare Weights

16 Major Groups

20 KPS Standard Menu

21 Master Files

30 Servers

Downlining to All Workstations

In most instances, after you change your program you must send the changes to all

workstations. Use the following procedure to downline (send) your files system-wide.

Note: Do not use the following procedure to downline your PLU file without first reading

the warnings for PLU file downlining.

1.

With your keylock in MGR Mode, use this sequence to advance to the Downline

program. Your system displays the Downline menu, shown on the next page. This

menu consists of more than one page. You can use the Cursor Up ( ) and Cursor

Down ( ) keys to move up and down in the Downline menu.

        

        

        

        

5

CASH

6

0

CASH

5-78

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments