manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

Starting a Guest Check

APPLICATIONS

Direct Access Service

You can have up to two Service keys on your keyboard. They will be labelled to match the

service area, "Bar Service", "Room Service", etc. When you press the Service key, any

special taxes are calculated, and the order is relayed to applicable remote devices,

including kitchen printers or videos.

After you open the guest check and register the items, press the Service key to store the

balance. If your system uses a Slip Printer, place a check in the printer before you press

the Service key.

 

SERVICE

Note: If you are using kitchen printers or videos, Service relays the orders to their

appropriate destinations. You can recall the order, as needed, to add new items or

make adjustments. See Recalling a Guest Check for this procedure.

Coded Service

To save space on your keyboard, you may have a single Service key that accesses both

service areas. The service areas are assigned a number (1 or 2) that is entered on the

Service key. Use this procedure if your system is set up in this manner.

1.

Enter the number (1 or 2) associated with this service.

2.

Press SERVICE. If your checks are printed on a slip printer, place the guest check

in the printer before you press SERVICE.

 

 [ service # ]

 

SERVICE

Note: If you press the SERVICE key without entering a number, the transaction is applied

to Service 1.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

3-7

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

IBM 2292 Hardware Maintenance Manual preview
2292
Brand: IBM Pages: 230
Acer Power SV Manuel D'Utilisation preview
Power SV
Brand: Acer Pages: 30
J.Burrows TORO WORKSTATION JBTORO15WS Assembly Instructions Manual preview
TORO WORKSTATION JBTORO15WS
Brand: J.Burrows Pages: 8
IBM IntelliStation Z Pro Specifications preview
IntelliStation Z Pro
Brand: IBM Pages: 2
DMP Electronics EBOX-3310MX-S4C User Manual preview
EBOX-3310MX-S4C
Brand: DMP Electronics Pages: 41
Oval EL4101 Instructions Manual preview
EL4101
Brand: Oval Pages: 18
Vivo DESK-V100ZE Instruction Manual preview
DESK-V100ZE
Brand: Vivo Pages: 3
Casio FX-795P Owner'S Manual preview
FX-795P
Brand: Casio Pages: 133
Asus BT14675 User Manual preview
BT14675
Brand: Asus Pages: 16
Dell Precision 370 - SX280 Ultra Small Form Factor Quick Reference Manual preview
Precision 370 - SX280 Ultra Small Form Factor
Brand: Dell Pages: 162
Sharp PN-TPCi7W7 User Manual preview
PN-TPCi7W7
Brand: Sharp Pages: 13
Sharp Shuttle PN-SPCi5W7 Installation Manual preview
Shuttle PN-SPCi5W7
Brand: Sharp Pages: 14
Sharp PN-TPC1W User Manual preview
PN-TPC1W
Brand: Sharp Pages: 14
Sharp PN-L702B Operation Manual preview
PN-L702B
Brand: Sharp Pages: 58
Lenovo ideaCentre N308 Hardware Maintenance Manual preview
ideaCentre N308
Brand: Lenovo Pages: 29
Lenovo ideaCentre N300 Maintenance Manual preview
ideaCentre N300
Brand: Lenovo Pages: 30
Lenovo IDEACENTRE K3 Hardware Replacement Manual preview
IDEACENTRE K3
Brand: Lenovo Pages: 37
Lenovo IdeaCentre K200 Hardware Replacement Manual preview
IdeaCentre K200
Brand: Lenovo Pages: 32

Brands by name

Popular brands

Load more brands