manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual

The Bosch 5000 Series is a high-performance appliance designed to elevate your cooking experience. With our user-friendly manual packed with Quick Tips, you'll master its advanced features effortlessly. Download the free manual from our website manualshive.com, and unlock the full potential of your Bosch 5000 Series appliance.

Share
Download
background image

OPERATOR PROCEDURES

Gift Certificates

Gift Certificate Redemptions

When a customer pays with a gift certificate, use the Gift Certificate Redemption

procedure. Your system can be programmed with a preset redemption key or with an open

key that lets you specify the redemption amount. Refer to the procedure for your

restaurant.

Preset G.C. Redemptions

Use this procedure if your G.C. Redemption key has a pre-programmed redemption

amount.

Press the G.C. REDEEM key. The preset amount is subtracted from the customer total.

G.C.

REDEEM

Open G.C. Redemptions

If your restaurant offers a variety of gift certificate coupons, you may have only one G.C.

Redemption key. This key allows you to enter any amount needed. Use this procedure for

open redemption.

1.

Enter the amount of the certificate being redeemed. 

2.

Press G.C. REDEEM. The amount you enter is subtracted from the customer

transaction. This example shows a $5.00 gift certificate redemption.

        

        

        

5

0

0

G.C.

REDEEM

Note: Your Gift Certificate Redemption key can be set up with an high limit to help

prevent keying errors. If a "HALO" (High Amount Lock-Out) error message displays,

you have attempted to enter an amount too high for this key. If necessary, your

manager can override this limit by turning the keylock to MGR Mode.

2-40

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments

Related manuals for 5000 Series

IBM Personal Computer Referencia Rápida preview
Personal Computer
Brand: IBM Pages: 64
IBM 709 General Information Manual preview
709
Brand: IBM Pages: 52
IBM 3290 Manual preview
3290
Brand: IBM Pages: 158
Radio Shack 1750L Owner'S Manual preview
1750L
Brand: Radio Shack Pages: 52
XtendLan RB-851 User Manual preview
RB-851
Brand: XtendLan Pages: 17
Simrad MARINE COMPUTER - INSTALLATION REV A Installation Manual preview
MARINE COMPUTER - INSTALLATION REV A
Brand: Simrad Pages: 40
IBM 300PL (Dutch) Software Manual preview
300PL
Brand: IBM Pages: 40
Casio DT-300 Hardware Manual preview
DT-300
Brand: Casio Pages: 25
Bosch Rexroth 3 842 998 350 Operating Instructions Manual preview
Rexroth 3 842 998 350
Brand: Bosch Pages: 122
Dell Dimension XPS H233 Service Manual preview
Dimension XPS H233
Brand: Dell Pages: 89
Dell Dimension XPS R Series Service Manual preview
Dimension XPS R Series
Brand: Dell Pages: 94
Dell DIMENSION XPS GEN 3 WHL User Manual preview
DIMENSION XPS GEN 3 WHL
Brand: Dell Pages: 144
Dell Inspiron 14 5415 Setup And Specifications preview
Inspiron 14 5415
Brand: Dell Pages: 21
Dell Inspiron 1410 Service Manual preview
Inspiron 1410
Brand: Dell Pages: 35
Dell Inspiron 14 5410 Quick Start Manual preview
Inspiron 14 5410
Brand: Dell Pages: 14
Dell Inspiron 1546 Specifications preview
Inspiron 1546
Brand: Dell Pages: 8
Dell Inspiron 1470 Service Manual preview
Inspiron 1470
Brand: Dell Pages: 45
Dell Inspiron 20 Owner'S Manual preview
Inspiron 20
Brand: Dell Pages: 85

Brands by name

Popular brands

Load more brands