Panasonic 5000 Series Operating Instructions Manual Download Page 291

Page: 291 / 309

MANAGER PROGRAMS

Recipe Program

10.

Make sure it is positioned on one of the third lines (13, 23, 33, 43... 93, 103). Enter

the amount of this ingredient (0.0000 - 99.9999) that you are using within this

recipe.

11.

Press CASH.

[ quantity ]

CASH

Example:

One bag of potatoes yields twenty-four portions of the "Small Fries"

menu item. This means that the "Small Fries" recipe uses 1/24th of

the bag of potatoes. Therefore, the quantity you enter for the potato

ingredient is 1 ÷ 24, or 00.0417.

12.

Repeat Steps 3 - 11, as needed, for each ingredient you use within this recipe.

13.

Repeat Steps 2 - 12 for each recipe you must program or change.

14.

To leave this program, press CASH. From the P1 Mode menu, you can select

another program, if necessary.

CASH

15.

To return to MGR Mode, press CASH again.

CASH

In this program, you can use the following key sequences advance the cursor from

recipe to recipe or from field to field.

(recipe #)

CSHR -

displays the recipe and places the cursor in the first

line of the first ingredient.

CSHR -

advances you to the next programmed recipe in the

file.

(line #)

SBTL -

moves the cursor to line you specify.

SBTL -

moves the cursor to next data field.

(data)

CASH -

inputs and entry, then advances to the next available

line.

CASH -

exits the Recipe File Program.

5-72

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

Summary of Contents for 5000 Series






















































































































































































































































































































Search results

Summary of Contents for 5000 Series

Reviews:

Panasonic 5000 Series, Operating Instructions Manual, Page: 291 / 309

Search results

Summary of Contents for 5000 Series

Reviews: